If you've landed on this blog by mistake, please follow this link:


www.Washington.PreppersNetwork.com

Please update your bookmarks and the links on your sites.



Join our forum at:


Showing posts with label Wilderness Fire Starting. Show all posts
Showing posts with label Wilderness Fire Starting. Show all posts

Saturday, May 1, 2010

Stovetec Rocket Stoves

In third world countries, Stovetec is rapidly becoming a household name. It is the name for a rocket stove design which has delivered over 70,000 stoves to third world countries and disaster areas such as Haiti and Chile after their two major earthquakes.

I have studied quite a few rocket stove websites for the purpose of obtaining one or making my own stove to add to my emergency preparedness gear for disaster preparedness. When I discovered the Stovetec, it was love at first sight. Here are my reasons for purchasing one and why I am now assisting my wife in distributing this stove.

1. The stove has been tried and tested in real situations where the world as we know it has ended from refugee camps and Red Cross shelters to small villages and hamlets in disaster areas. Stovetec has delivered over 70,000 units to third world nations as of this time and works with many humanitarian organizations worldwide.

2. The stove burns a minimum of 50% less wood and has 70% fewer emissions of carbon monoxide than standard stove fires because of it's design, which acts as a 'gasifier' effect to more completely burn the gases produced.

3. It burns sticks, charcoal and coal and can be adapted to burn wood pellets, thus, when there is no longer any gas or propane or other fuels left after "teotwawki" happens, you can burn just about anything, from just a handful of sticks to dried cow and steer manure to boil your water or cook your food with.

4. Stovetec stoves are put together well with a metal bucket design with firebrick and cast iron grates and cast iron stove top. It has two metal doors. An upper door which, when removed can load sticks on the accompanying metal rack shelf. The lower door can be opened to allow air flow under the fire to fan the flames and better cook the fuel, creating a rocket affect with better combustion and better concentration of heat. When burning charcoal or coals, the top shelf firebrick is returned and the upper door is closed. Only the bottom door is used to adjust the amount of air flow to the coal or charcoal. Also the kit includes an aluminum pot skirt which hugs the pot you place on top of the stove and helps reduce another 25% in fuel use as it concentrates the heat around the bottom of the pot and the sides of the pot. The skirt is adjustable for different size pans up to 10 inches in diameter.

5. Want to cook with your cast iron frying pan or your dutch oven? No problem.

6. Cleaner burning translates to less smoke to breathe.

7. The Stovetec Wood-Charcoal Stove retails for $49 and coupled with shipping and handling from Southern Oregon the price comes to $65.00, a very good price for a very good stove of this quality.

8. This is a great addition to your emergency preparedness gear. When there is no fuel left after an emergency, there will always still be sticks to fire up your stove for free.

9. Boiling water or cooking with a handful of sticks is very conservative and helps save our environment in many ways.

If you would like to see a Stovetec Rocket Stove or pick one up locally in Lewis, Pierce or Thurston County, send me an email at photowild@yahoo.com.

Monday, February 9, 2009

How To Start a Fire in the Wilderness








I was going through the army survival guide (FM 3-05.70) that Bill loaned to me and came across this section on lighting fires in the wilderness. The fire-plow system reminded me of the movie Castaway that Tom Hanks played in where he was a FedEx plane crash survivor on an island and had to create fire using a fire-plow. You never know when you will need to know, and apply, these survival skills.

HOW TO LIGHT A FIRE
Always light your fire from the upwind side. Make sure to lay your tinder, kindling, and fuel so that your fire will burn as long as you need it. Igniters provide the initial heat required to start the tinder burning. They fall into two categories: modern methods and primitive methods.
Modern Methods
Modem igniters use modem devices--items we normally think of to start a fire.

Matches
Make sure these matches are waterproof. Also, store them in a waterproof container along with a dependable striker pad.

Convex Lens
Use this method (Figure 7-6) only on bright, sunny days. The lens can come from binoculars, camera, telescopic sights, or magnifying glasses. Angle the lens to concentrate the sun's rays on the tinder. Hold the lens over the same spot until the tinder begins to smolder. Gently blow or fan the tinder into flame, and apply it to the fire lay.

Metal Match
Place a flat, dry leaf under your tinder with a portion exposed. Place the tip of the metal match on the dry leaf, holding the metal match in one hand and a knife in the other. Scrape your knife against the metal match to produce sparks. The sparks will hit the tinder. When the tinder starts to smolder, then gently low or fan the tinder into flame, and apply it to the fire lay.

Battery
Use a battery to generate a spark. Use of this method depends on the type of battery available. Attach a wire to each terminal. Touch the ends of the bare wires together next to the tinder so the sparks will ignite it.

Gunpowder
Often, you will have ammunition with your equipment. If so, carefully extract the bullet from the shell casing, and use the gunpowder as tinder. A spark will ignite the powder. Be extremely careful when extracting the bullet from the case.

Flint and Steel
The direct spark method is the easiest of the primitive methods to use. The flint and steel method is the most reliable of the direct spark methods. Strike a flint or other hard, sharp-edged rock edge with a piece of carbon steel (stainless steel will not produce a good spark). This method requires a loose-jointed wrist and practice. When a spark has caught in the tinder, blow on it. The spark will spread and burst into flames.

Fire-Plow
The fire-plow (Figure 7-7) is a friction method of ignition. You rub a hardwood shaft against a softer wood base. To use this method, cut a straight groove in the base and plow the blunt tip of the shaft up and down the groove. The plowing action of the shaft pushes out small particles of wood fibers. Then, as you apply more pressure on each stroke, the friction ignites the wood particles.

Bow and Drill
The technique of starting a fire with a bow and drill (Figure 7-8) is simple, but you must exert much effort and be persistent to produce a fire. You need the following items to use this method:
· Socket. The socket is an easily grasped stone or piece of hardwood or bone with a slight depression in one side. Use it to hold the drill in place and to apply downward pressure.
· Drill. The drill should be a straight, seasoned hardwood stick about 2 centimeters in diameter and 25 centimeters long. The top end is round and the low end blunt (to produce more friction).
· Fire board. Its size is up to you. A seasoned softwood board about 2.5 centimeters thick and 10 centimeters wide is preferable. Cut a depression about 2 centimeters from the edge on one side of the board. On the underside, make a V-shaped cut from the edge of the board to the depression.
· Bow. The bow is a resilient, green stick about 2.5 centimeters in diameter and a string. The type of wood is not important. The bowstring can be any type of cordage. You tie the bowstring from one end of the bow to the other, without any slack.

To use the bow and drill, first prepare the fire lay. Then place a bundle of tinder under the V-shaped cut in the fire board. Place one foot on the fire board. Loop the bowstring over the drill and place the drill in the precut depression on the fire board. Place the socket, held in one hand, on the top of the drill to hold it in position. Press down on the drill and saw the bow back and forth to twirl the drill (Figure 7-8). Once you have established a smooth motion, apply more downward pressure and work the bow faster. This action will grind hot black powder into the tinder, causing a spark to catch. Blow on the tinder until it ignites.
Note: Primitive fire-building methods are exhaustive and require practice to ensure success.

HELPFUL HINTS
Use nonaromatic seasoned hardwood for fuel, if possible.
Collect kindling and tinder along the trail.
Add insect repellent to the tinder.
Keep the firewood dry.
Dry damp firewood near the fire.
Bank the fire to keep the coals alive overnight.
Carry lighted punk, when possible.
Be sure the fire is out before leaving camp.
Do not select wood lying on the ground. It may appear to be dry but generally doesn't provide enough friction.
Washington Preppers Network Est. Jan 17, 2009 All contributed articles owned and protected by their respective authors and protected by their copyright. Washington Preppers Network is a trademark protected by American Preppers Network Inc. All rights reserved. No content or articles may be reproduced without explicit written permission.